Tail Light Retrofit

Next up, I need to get brake lights and turn signals working to safely get to the shop to build the cabinets. On Expedition Portal there was a thread about using sign modules inside the flashers instead of the bulbs. So I ordered some up from SuperBrightLED. They look like this:

These are pretty cool little lights, cheap and easy to use. 

I left the arrow turn signals, the bottom brake and reverse lights with regular bulbs. In the 4 previous flashers, i put 1 module in each for ICC lights and 4 modules in each for Turn or brake. Top two became brake lights and bottom two turn signals. They work very well. I just screwed them into the reflector in the flasher, VHB tape didn’t hold:

Now I can get to the shop to build cabinets!!!